HomeSeer 3 plugins by Kazteel LLC

HomeSeer is a Smart Home Automation platform. It is enhanced and extended with plugins written by HomeSeer Technologies and by 3rd party plugin developers.

Insteon Thermostat plugin for HS3

Insteon Thermostat Plug-In by Kazteel LLC

Name:	Insteon Thermostat
Type:	VB.Net 4.0 Plugin
Provider:	Kazteel LLC
Cost:	Free to try $29.95 to buy
Compatible:	HomeSeer 3.0.0.96, Insteon Plugin 3.0.4.2 or later

Description

This plug-in adds support for Thermostats compatible with the Insteon protocol. It allows HomeSeer to be configured to connect to these thermostats, receive real-time status updates, send thermostat control commands and establishes the necessary HomeSeer devices, triggers and actions to be used in events for more complex control.

Requirements

Insteon compatible Thermostat (e.g. 2441TH, 2441ZTH, 2441V, Venstar with integrated Insteon adapter)
HomeSeer 3
Insteon plugin for HomeSeer 3 by Mark Sandler (will not work with HST basic Insteon plugin)
.Net Framework 4.0

Support

See the online help documentation after installing plug-in in trial mode.

Please visit the Insteon Thermostat Forum for more details and support for this plug-in.

Revision History
Revision history

Napco Gemini plugin for HS3

Napco Gemini Plug-In by Kazteel LLC

Name:	Napco Gemini
Type:	VB.Net 4.0 Plugin
Provider:	Kazteel LLC
Cost:	Free to try $39.95 to buy
Compatible:	HomeSeer 3.0.0.54 or later

Description

This plug-in adds support for the legacy Napco Gemini security panels that use GEM-Automation. It allows HomeSeer to receive configuration information (zones/areas), real-time status updates (events/keypad status messages) and to control certain functions of the panel. It adds many new triggers and several new actions to HomeSeer.

Requirements

Napco GEM or GEMC panel as documented in the GEMINI Home / Building Automation Development Specification (WI876H 03/13)
- GEM-P3200 panels with v11 hardware (i.e. "older", pre-2003) are reported to work with GEM-AUTOMATION
- GEM-P3200 panels with v20 or newer hardware (i.e. "newer", 2003+) are reported to NOT work with GEM-AUTOMATION despite the Napco dev spec documention
GEM-AUTOMATION (firmware upgrade) REQUIRED
GEM-RS232 (recommended) or PCI-MINI (optional) are required
GEM-RM3008 (optional external relay support)
.Net Framework 4.0

Support

See the online help documentation after installing plug-in in trial mode.

Please visit the Napco Gemini Forum for more details and support for this plug-in.

Revision History
Revision history